A Bit of Lace by Meg Swansen
Page 140: Row 3 K1, yo, k7, yo, k1—11 sts. Download corrected pattern chart [PDF 26KB]Pattern #3, Multi Pattern Top
Photo on page 67, instrux begin on page 105
Updated: 13Apr2010
1. Chart corrections, pg 107
Row 41 St 2 delete M1 pwise symbol, work as St st
St 66 add M1 pwise symbol
St 96 delete M1 pwise symbol, work as St st
Row 42 St 66 delete M1 pwise symbol, work as St st
Row 49 St 42 delete M1 pwise symbol, work as St st
Row 75 Sts 51 and 59 add Ssk symbol
Sts 55 and 63 add K2tog symbol
Row 77 Sts 52 and 60 add Ssk symbol
St 54 add K2tog symbol
Pattern #4, Swing Jacket
Photo on page 68, instrux begin on page 106
Updated: 13Apr2010
1. Left Front
Correction is underlined
Cast on and knit 8 rows as directed. Then, beg with a purl (RS) row and continue in Rev St st as directed.
2. Chart corrections, pg 107
Row 41 St 2 delete M1 pwise symbol, work as St st
St 66 add M1 pwise symbol
St 96 delete M1 pwise symbol, work as St st
Row 42 St 66 delete M1 pwise symbol, work as St st
Row 49 St 42 delete M1 pwise symbol, work as St st
Pattern #6, Short Sleeve Pullover
Photo on page 70, instructions begin on page 109
Updated: 06Jan2012
Download the revised Chart #1 [PDF 33KB]
Pattern #10, Crocheted corset
Photo on page 75, instrux begin on page 114
Explanation Left half panels
Left Half—Panel #1
Beg at top edge, with [B] and standard hook, ch 87.
Rows 1-5: Rep rows 1-5 Right Panel #1 – 86 sts
Row 6: Tss across (TssDecEnd for XS only). Switch to [B] for last yo of return pass. 85 (86, 86) sts
Rows 7-8: Attach third bone—Work BSC into vertical threads sts of prev row. For 2nd row of BSC, sc2tog the 3rd and 4th sts from beginning of the row. Switch to [A] for final yo of last st of row 8. 83 (84, 84) sts
Row 9: (TssDecBeg for XS), tss across. Return 82 (84, 84)sts
Row 10: Tss across until TssDecEnd. 81 (83, 83) sts.
XS – For return pass, work 8 lps off hook only.
S, M – Work all lps off hook.
Next Row (S,M only): TssDecBeg, tss across. S – For Return pass, work 9 sts off hook only. M – Work all lps off hook. – (82, 82)
Next Row (M only): Tss across, TssDecEnd. For Return pass, work 9 sts off hook only. –(-81) sts.
Next Row /Bottom: Tss to end (S—TssDecEnd). For return work off 4 lps. 81 (81, 81) sts
Next Row /Bottom: Tss, TssDecEnd. For return work off all lps. 80 (80, 80)sts
Next Row /Top: (XS/M—TssDecBeg), tss until 43 sts are on hook. 79 (80, 79)sts
Next Row /Top: (M—TssDecBeg) Tss 29 sts. Return. 79 (79, 78)sts
Next Row /Top: (XS/S—TssDecBeg), tss until 20 lps are on hook. Return. 78 (78, 78) sts
Next Row /Top: TssDecBeg, tss until 8 lps are on hook. Return. 77 (77, 77) sts
Next 2 rows: Attach fourth bone—With [B], work BSC into sc sts of prev row. 77 (77, 77) sts
Left Panel #2
Row 1/ Top: Tss until 8 sts on hook. Return. 77 (77, 77) sts
Row 1/Bottom: Tss across. Work 2 sts off hook.
Row 2/Bottom: Tss to end. Work 8 sts off hook.
Row 3/Bottom: Tss to end, for return work 17 sts off hook.
Rows 4-5: Tss to end, work all lps off hook.
Row 6: TssDecBeg, tss to end. Return. 76 (76, 76) sts
Row 7: (XS—TssDecBeg), tss until (XS—TssDecEnd). Return. 74 (76, 76) sts
Row 8: Tss to end.
XS: Work 15 sts off hook.
S/M: Work all sts off hook
Next Row (S/M only): (S/M—TssDecBeg) tss across (S- TssDecEnd) S—For return work 14 sts off hook. M—Work all sts off hook.—(74, 75) sts
Next Row (M only): Tss across, for return work 15 sts off hook.
Row 9/Bottom: Tss across(XS/M—TssDecEnd), work 7 sts off hook 73 (74, 74) sts
Row 10/Bottom: Tss until end, work 2 (4, 4) sts off hook.
Row 11/Bottom: Tss, (S/M—TssDecEnd). Work all sts off hook. 73 (73, 73) sts
Row 9/Top: Tss until 12 sts on hook. Return. (73 sts)
Next 2 rows: Attach fifth bone—With [B], work BSC into sc sts of prev row. 73 (73, 73) sts
Left Panel #3
Row 1/Top: Start Top Shaping – Working with [A], TssDecBeg, tss until 3 sts on hook. Return. 72 (72, 72) sts
Row 2/Top: Tss 11 sts. Return.
Row 3/Top: Tss 20 sts. Return.
Row 4/Top: (XS – TssIncBeg), Tss until 30 sts on hook. Return. 73 (72, 72) sts
Row 5/Top: (S – TssIncBeg), Tss 42 sts. Return. 73 (73, 72) sts
Row 6: (XS, M – TssIncBeg), Tss until end. For return, work 5 sts off hook. 74 (73, 73) sts
Row 1/Bottom: Tss until end, for return work 11 sts off hook.
Row 2/Bottom: Tss until end, for return work 20 sts off hook.
Row 3/Bottom: Tss until end,
XS: for return, work 58 lps off hook.
S/M: Work all loops off hook
Next Row (S/M Only): (S—TssIncBeg) Tss until end. S- For return work 58 lps off hook, M—For return work all lps off hook.—(74, 73) sts
Next Row (M Only): TssIncBeg, tss until end. For return work 58 lps off hook.—(74) sts
Next Row /Bottom: Tss until end, for return work 35 sts off hook.
Next Row /Bottom: Tss until end, for return work 13 sts off hook.
Next Row /Bottom: Tss until end, for return, work all sts off hook.
Next Row: Tss. Return. 74 (74, 74) sts
Next 2 rows: Attach sixth bone—With [B], work BSC into sc sts of prev row. For 2nd row of BSC, 2 sc in the 3rd st from the end of the row. 75 (75, 75) sts
Left Panel #4
Row 1/Top: Start top shaping—Working with [A], Tss 17 sts. Return. 75 (75, 75) sts
Row 2/Top: Tss 40 sts. Return.
Row 3/Top: TssIncBeg, tss until 63 sts on hook. Return. 76 (76, 76) sts
Row 4: Tss until TssIncEnd. Return. 77 (77, 77) sts
Row 5: TssIncBeg, tss until end. Return 78 (78, 78) sts
Row 6: (XS—TssIncBeg), tss until end. 79 (78, 78) sts
XS: For return, work 55 sts off hook.
S/M: Work all sts off.
Next Row (S, M Only) (S—TssIncBeg), tss until end. S – For return, work 55 sts off hook, M- Work all sts off hook. 79 (79, 78) sts
Next Row (M Only) TssIncBeg, tss. For return, work 55 sts off hook. 79 (79, 79) sts
Row 7/Top: Tss until TssDecEnd. For return, work 33 sts of hook. 78 (78, 78) sts
Row 8/Top: Tss until end. For return work 21 sts off hook.
Row 9/Top: Tss until end. For return, work 14 sts off hook.
Row 10/Top: Tss until end. For return, work 8 sts off hook.
Row 11/Top: Tss until end. For return, work 2 sts off hook.
Row 12/Top: Tss until end, work all sts off hook.
Next 2 rows: Attach seventh bone—With [B], work BSC into sc sts of prev row (78 sts)
Left Panel #5
Row1/Top: Start top shaping—Working with [A], Tss 21 sts. Return. 78 (78, 78) sts
Row 2/Top: Tss 27 sts, return.
Row 3/Top: Tss 34 sts, return.
Row 4/Top: Tss 43 sts, return.
Row 5: Tss across. For return, work 12 sts off hook.
Row 1/Bottom: Tss until end. For return, work all sts off hook.
Work 3 (4, 5) more rows even in Tss.
Row 9: Start bottom shaping—Tss until end, for return, work 21 sts off hook.
Row 10/Bottom: Tss until end, for return work 11 sts off hook.
Row 11/Bottom: Tss until end, for return work 4 sts off hook.
Row 12/ Bottom: Tss until end, for return, work all sts off hook.
Row 10/ Top: Start top shaping—Tss 34 sts, return.
Row 11/Top: Tss 18 sts, return. 78 (78, 78) sts
Next 2 rows: Attach eighth bone—With [B], work BSC into sc sts of prev row 78 (78, 78) sts
Left Panel #6
Row 1/Top: Start top shaping – Working with [A], Tss 23 sts. Return. 78 (78, 78) sts
Row 2/ Top: Tss 34 sts, return.
Row 3: (XS—TssDecBeg), tss across. For return, work 7 sts off hook. 77 (78, 78) sts
Row 1/Bottom: Tss to end, for return work 15 sts off hook.
Row 2/Bottom: Tss to end, for return work all lps off hook.
Row 4: (S, M—TssDecBeg) Tss, TssIncEnd. Return 78 (78, 78) sts
Row 5: Tss to end. Return.
Row 6: Tss to TssIncEnd. Return. 79 (79, 79) sts
Row 7: (XS—TssDecBeg), tss to end. Return. 78 (79, 79) sts
Next Row (S, M only): TssDecBeg, Tss. For S, work 50 sts off hook. For M, work all sts off hook. – (78, 78) sts
Next Row (M only): Tss to end. For return, work 50 sts off hook.
Row 8/Top: Tss 50 sts. Return.
Row 9/Top: Tss 14 sts. Return.
Next 2 rows: Attach ninth bone—With [B] work first row of BSC into tss sts of prev row. For 2nd row of BSC, use stitches to join right half of corset to left half of corset. Lay the right half of the corset in position for joining, with the WS of both halves of the corset facing. Join corset by a modified 2nd row of the BSC Insert hook in between sts of the prev row, yo, pull up a loop. Insert hook through edge vertical bar on right corset, yo, pull through all lps on hook including vertical bar on corset. Continue to work this way for every stitch until end. Tie off. 78 (78, 78) sts.
Pattern #11, Flowered Belt Camisole
Photo on page 76, instructions begin on page 116
Updated: 24Jun2010
Corrections are underlined.
1. pg. 117, Panel 1 should be labeled as CHART 1, Panel 2 should labeled as CHART 2, Panel 3 should be labeled as CHART 3.
Row numbers should be on the left side of charts 2 and 3 as odd numbered rows are worked on the WS. Even numbers should be on the right side of charts 2 and 3 to indicate RS rows.
2. pg. 117 CABLE PANEL 2 ( make 4) should read CABLE PANEL 3 (make 4)
3. BACK BODICE
Dec row (RS) P1, k1, work 5 sts of chart 1, SKP, k to last st of first side, p1; on 2nd side, p1, k to last 9 sts, k2tog, work 5 sts of chart 1, k1, p1.
Next row K1, p1, work 5 sts of chart 1, p to last st of first side, k1; on 2nd side, k1, p to last 7 sts, work 5 sts of chart 1, p1, k1.
4. FRONT BODICE
Cast on and work row 1 as for Back Bodice – 107 sts.
Beg chart pat
Row 1 (WS) K1, p3, (k1, p3, k1) for 5 sts of chart 1, p4, (k1, p3, k1) for 5 sts of chart 1, p18 for chart 2, (k1, p3, k1) for 5 sts of chart 1, (p10, k1, p3, k1, p10) for 25 sts of chart 3,
(k1, p3, k1) for 5 sts of chart 1, p18 for chart 2, (k1, p3, k1) for 5 sts of chart 1, p4, (k1, p3, k1) for 5 sts of chart 1, p3, k1.
Note Read before cont to knit.
Cont in chart pats (beg with row 1 of chart 1 and row 2 of charts 2 and 3) and St st as established until 38 rows have been worked from beg (for chart 2 only – work 16-row rep twice, then work rows 17 – 22 once, then continue in St st), AT SAME TIME, inc 1 st each side ( working incs as St st) every 8th row 4 times – 115 sts.
Armhole shaping
Cont in pats as established and work as for back armhole….
Pattern #12, Lace Edge Jacket
Photo on page 77
Correction is underlined.
The yarn for this jacket, Gedifra’s “Fiocco,” is distributed by Westminster Fibers, Inc.
Pattern #17, Cable/Seed Top
Photo on page 84, instructions begin on page 123
Updated: 24Jun2010
Corrections are underlined.
Definitions of the following cables were omitted from the Stitch Glossary on p. 123:
10-st RC (6/4) Slip 6 sts to cn and hold to back, k4, k sts from cn.
13-st RC (6/7) Slip 6 sts to cn and hold to back, k7, k sts from cn.
The following cables were not used and should be deleted from the Stitch Glossary on p. 123:
11-st RC, 13-st LC, 16 st RC
Cables are incorrectly labeled in the Stitch Keys on pp. 124-125:
8-st RPC should be 8-st RC
8-st LPC should be 8-st LC
9-st RPC should be 9-st RC
9-st LPC should be 9-st LC
10-st RPC should be 10-st RC
10-st LPC should be 10-st LC
10-st RPC (6/4) should be 10-st RC(6/4)
Pattern #24, Cabled Sweater
Photo on page 91, instructions begin on page 130
Updated: 24Jun2010
Corrections are underlined.
STITCH GLOSSARY
4-st RC Sl 2 sts to cn and hold to back, k2, k2 from cn
4-st LC Sl 2 sts to cn and hold to front, k2, k2 from cn
4-st RPC Sl 2 sts to cn and hold to back, k2, p2 from cn
4-st LPC Sl 2 sts to cn and hold to front, p2, k2 from cn
Pattern #27, Side Tie Vest
Photo on page 94, instructions begin on page 133
Updated: 24Jun2010
Correction is underlined.
STAGGERED RIB PATTERN
Rows 6 and 8 *K5, p1; rep from * to end. This completes the staggered rib.
Pattern #32, Embroidered Jacket
Photo on page 99, instructions begin on page 136
Updated: 24Jun2010
Right front instrux were omitted from magazine.
RIGHT FRONT
With size 7(4.5mm) needles and A, cast on 2(5, 5, 7) sts.
Row 1 (RS) Inc 1 st in first st(center edge), k to end.
Row 2 (WS) Purl to last st, inc 1 in last st—4(7, 7, 9) sts.
Cont to work as for left front, reversing shaping as follows: work center incs and neck shaping at the beg of RS rows/end of WS rows, work raglan armhole shaping at the beg of WS rows/end of RS rows.
